This page describes Recalbox 11.0, available only to patrons through the
patronchannel.
Windows 95 (1995) and Windows 98 (1998) are the Microsoft systems most PC games of the late nineties came out on: strategy, management, adventure, simulation, and the first accelerated 3D games. They took over from MS-DOS: a Windows game installs from its CD, then starts from the Start menu.
Recalbox runs them with DOSBox-X, which emulates a whole PC of the day: Pentium processor, S3 video card, Sound Blaster 16, 3dfx Voodoo 3D card, hard disks and a CD drive.
| Publisher | Microsoft |
| Release | Windows 95: August 1995 · Windows 98: June 1998 |
| Kind of games | Every genre, 2D and 3D |
| Emulated machine | Pentium MMX, 64 MB of memory, S3 SVGA video card, 3dfx Voodoo Graphics, Sound Blaster 16 and MPU-401 |
| Emulator | DOSBox-X 2026.10.01 (GPL v2), with Recalbox's patches |
| Mouse | Required — or the gamepad standing in for it (right stick) |
| Keyboard | Recommended |
| Gamepad | Optional, depending on the game |
Windows is not shipped: it is yours to provide, along with the 3dfx driver — see What you need, below. Without it the system has nothing to boot.
New in Recalbox 11.0: the Windows 95/98 system arrives, on Raspberry Pi 5 and on PC.
Emulator availability per board:
| Emulator | RPI3/RPI02W | RPI4/400 | RPI5/500 | OGA/OGS/RG351 | PC | RG353 |
|---|---|---|---|---|---|---|
dosbox-x |
❌ | ❌ | ✅ | ❌ | ✅ | ❌ |
There is nothing to set in the emulator: screen, sound, mouse, keyboard and gamepad are configured at every launch. Netplay, softpatching and RetroAchievements are not available on this system.
On a cathode screen, the display is handled. When Recalbox asks for the game's resolution, choose 480p on a 31 kHz screen: the Windows desktop fits entirely. On a 15 kHz TV, choose 480i — the desktop is sharp and whole; in
240porAUTOeverything fits on screen, but Windows' text is small.
| Raspberry Pi 5 | PC | |
|---|---|---|
| 2D games (strategy, management, adventure…) | ✅ nearly all of them | ✅ |
| 3D games using the 3dfx card | ✅ many (Tomb Raider II and III, POD Gold, Quake…) | ✅ |
| 3D games with no 3D card, big 3D games of 1999-2000 | ⚠️ often too slow | ✅ depending on the machine |
Why not everything runs on a Raspberry Pi 5: a single core of the Pi runs the whole PC of the day. With the 3dfx card, the Pi's graphics chip draws the 3D and many games get through; without it, the game computes every pixel itself, and that is often too much for the Pi.
Team measurements from November 2026, on a Raspberry Pi 5 (CM5). The frame rates are the frames that actually change on screen. The games not listed have not been tried.
| Game | Result |
|---|---|
| Myst, Lemmings, SimCity 2000 SE, The Neverhood, Quake, Road Rash, Banzai Bug, Deus, Puyo Puyo 2, 3-D Ultra Pinball | Playable, 12 to 25 fps |
| MechWarrior 2 Mercenaries, Hellbender | Playable, in 3D |
| Comix Zone, Baku Baku Animal, Bust-A-Move, Gex, Afterlife, Bricklayer | Playable, 20 to 28 fps |
| Sonic & Knuckles Collection | Playable with a gamepad, 26 to 41 fps |
| Diablo | Playable, ~19 fps (the game caps itself at 20) |
| GLQuake (3dfx) | Smooth, ~22 fps |
| GTA 2 | Playable in Glide, with the 3dfx driver; Direct3D crashes |
| Age of Empires, Age of Empires II | Playable, 10 to 11 fps |
| Theme Hospital, Commandos, Monopoly, Pinball Mania, Tintin in Tibet, Tintin: Prisoners of the Sun, Puzzle Bobble 2X, Industry Giant, Fury3, MAX 2, GTA, Dynamite Joe | Playable, installed by themselves |
| Monster Truck Madness, Daytona USA Deluxe, Carmageddon | Slow: 6 to 10 fps |
| Midtown Madness, Test Drive 6, Dungeon Keeper 2, Theme Park World | Too slow to play |
| Caesar III and Pharaoh "HD Edition" | Refused: these modern re-releases want a recent Windows — the original CD is needed |
Recalbox ships neither Windows nor the 3D card's driver. Put them together in /recalbox/share/bios/win9x/:
| What to provide | Why | |
|---|---|---|
Windows: the image of your Windows 98 Second Edition CD and its key in productkey.txt — or the Windows 98 of eXoWin9x |
required | it is the PC your games run on |
The 3dfx driver: rkvg.exe |
recommended, at the same time as Windows | many 3D games of the day need it, or run far better with it |
QuickTime 2.1.2: QTINSTAL.EXE |
optional | without it, a few games of 1995-1996 (ISIS…) play without their videos |
Another SoundFont (.sf2) |
optional | only to change the sound of the games' MIDI music: Recalbox already provides one |
/recalbox/share/bios/win9x/
├── Windows98SE.iso
├── productkey.txt
├── rkvg.exe
└── QTINSTAL.EXE (optional)
These files do not go through the BIOS check: they are your own, and Recalbox does not know their checksums.
.iso, or a .zip holding it);XXXXX-XXXXX-XXXXX-XXXXX-XXXXX), written in the productkey.txt file already in the folder.At the first launch of a game, Recalbox installs Windows by itself, asking nothing: about twenty minutes on a Raspberry Pi 5, once and for all, with the progress on screen. Windows is then kept in /recalbox/share/saves/win9x/windows98.vhd and serves all your games.
productkey.txt is required: it is what makes the unattended installation possible. Without a key, DOSBox-X shows on screen where to write it instead of sitting on the question.
If you have the eXoWin9x collection, put only its Windows image W98-C.vhd (the collection's eXo/emulators/dosbox/x98/parent/ folder) in /recalbox/share/bios/win9x/. It comes before the CD, and already has the 3dfx driver.
rkvg.exeMany 3D games of the day use the 3dfx Voodoo card ("Glide" or "3Dfx" mode in their settings). Some do not run without it, others run without but far better with. The Windows 98 CD does not carry its driver, and Recalbox is not allowed to ship it: provide it along with Windows.
It is the file rkvg.exe ("3dfx Voodoo Graphics reference driver"). It is found on some game CDs, the GTA 2 one for instance: Drivers\3Dfx drivers\Voodoo1\rkvg.exe. A .zip holding it works too. Recalbox puts it into Windows at every launch, for all your games, even those already installed: it does not bother the games that never use it, so leave it in place.
In each 3dfx game, the 3dfx version has to be chosen: during the installation, in the game's graphics options, or through its configuration program. GTA 2, for instance, wants "3DFX Glide" in its GTA2 Manager.
Only the Voodoo Graphics driver, the first Voodoo, will do: that is the card Recalbox emulates. The Voodoo 2 and 3 drivers (
rkv2dx6.exe…) do not see it.
Some games of 1995-1996 install QuickTime 2.0, whose videos do not show in the emulator: the game plays, but without its films and transitions. QuickTime 2.1.2 shows them, and Recalbox is not allowed to ship that either.
Put its installer QTINSTAL.EXE ("QuickTime for Windows 2.1.2", 16-bit, 2 MB) in /recalbox/share/bios/win9x/. It is found on game CDs of the day; the eXoWin9x games that installed it keep it in their C:\WINDOWS folder. Recalbox puts it, at every launch, into the games that use QuickTime and only those; a game that installs it at its first start has its videos from the next one on.
Games concerned, for instance: ISIS, The Dark Eye, The Lords of Tantrazz, Chop Suey, Paperopolis, Rolling Stones Voodoo Lounge, Team Xtreme, Mr. Potato Head Saves Veggie Valley, Playskool Puzzles, Woodspell.
Many games of the day play their music over MIDI. Recalbox has a synthesiser play it, with a SoundFont: a .sf2 (or .sf3) file that gives the instruments their sound.
There is nothing to do: Recalbox takes the Roland_SC-55.sf2 SoundFont, already shipped for ScummVM in /recalbox/share/bios/scummvm/. The music then has the sound of a Roland SC-55, the reference MIDI card of the day. For another sound, put a SoundFont in /recalbox/share/bios/win9x/: it comes before ScummVM's.
Put your games in:
/recalbox/share/roms/win9x/
| Format | Extensions |
|---|---|
| ISO image | .iso |
| Image with audio tracks | .cue + .bin, .ccd, .mdf |
| Compressed image | .chd |
| One of those images inside an archive | .zip, .7z |
| List of a game's CDs | .m3u |
| An eXoWin9x game as it comes | .zip |
Use the game's original CD image. A game shipped as a folder, or as a .zip/.7z of files with no CD image inside, has to be made into an .iso first — DOSBox-X says so on screen. The eXoWin9x games whose files sit in a .zip (ISIS, Bombman, Krypton Egg…) work as they come.
A CD image: Windows boots and the game's installer opens, as when you insert the CD. Install the game normally, with the mouse; it starts at the end. Just before, Windows may restart once by itself: it shortens the gamepad's name, too long in some languages for certain games.
An eXoWin9x game: it is already installed, it starts straight away, from the very first launch.
Later launches: the game starts straight away.
256-colour games: a few games only run in 256 colours and say so at the first launch. Recalbox closes that message, switches Windows to 256 colours for that game alone and restarts it once, by itself; the game then starts straight away.
An archive (.zip, .7z) is unpacked once, at the first launch. A "Preparing the game…" screen shows the progress and the time left — about five minutes for a 5 GB DVD on a Raspberry Pi 5. HOTKEY + START cancels and returns to the game list; the unpacking will start over at the next launch.
Every game gets its own Windows: what one game installs — updates, drivers, DirectX — never bothers the others. And WinG, a 1995 graphics library some 1995-1996 games need (Comix Zone…), is not in Windows 98: Recalbox takes it by itself from the game's disk or CD.
Take the installation offered by default. A full installation does not make the game run faster: it copies the CD's contents onto the game's disk, which grows accordingly — often by 100 to 650 MB — while the CD image stays necessary anyway. The CD is not a slow old drive: it is your CD's image, read straight from your card or your disk.
One exception: when the installer offers a 3dfx version, take it, even if it uses more space.
Keep the CD number in the file names, the way they usually come — (Disc 1), (Disc 2), CD1, CD2…: Recalbox groups a game's CDs by itself.
/recalbox/share/roms/win9x/
├── Dungeon Keeper 2 (Europe) (Disc 1).zip
└── Dungeon Keeper 2 (Europe) (Disc 2).zip
HOTKEY + left stick or d-pad to the right, wait ten seconds or so for Windows to read the CD, then click OK or Retry. Once more goes back to CD 1. "CD 2/2" shows for four seconds at the bottom left, and the CD left in the drive is still there at the next launch, just like on a real PC.If your file names do not follow that rule, write an .m3u: a text file, next to the images, giving one CD file name per line, in order (lines starting with # are ignored). Launch the .m3u: Recalbox then shows only that file in the list.
/recalbox/share/roms/win9x/
├── Age of Empires II.m3u
├── Age of Empires II - The Age of Kings.iso
└── Age of Empires II - The Conquerors.iso
When a game installs another one from a second CD — an expansion, for instance — install the first one normally, then: HOTKEY + left stick or d-pad to the right to put the next CD in, and "Install from the CD" on the Windows desktop. Once two games are installed, Recalbox asks at launch which one to start.
The Windows desktop: 800×600, so that game launcher windows fit on screen; 640×480 on a cathode screen.
A small window: some games of the day open in a window (Comix Zone, Baku Baku, Bust-A-Move, Sonic & Knuckles Collection…). Their menus often offer a full screen — F4 for Bust-A-Move.
Sharp pixels: the INTEGER SCALE (PIXEL PERFECT) option of the in-game settings applies to Windows 95/98 too. On, the picture is scaled by a whole number: on a 1080p TV, a 640×480 game is shown twice as big, sharp, with a black border around it — but the Windows desktop and the 800×600 games then stay at their own size. Off, the picture fills the height of the screen.
A wide screen: on a 16:9, 16:10 or ultra-wide screen, the black bars beside the picture are replaced by a discreet decoration, the front of a PC of the day, like the overlays of the other systems. The RECALBOX OVERLAYS setting turns it off to keep the black bars, and an overlay of your own, dropped in /recalbox/share/overlays/win9x/, is taken instead.
| Gamepad, keyboard | Effect |
|---|---|
HOTKEY + START |
Quit: closes the game, then shuts Windows down |
F12 + Esc, on a keyboard |
Quit, like HOTKEY + START |
| Start > Shut Down, inside Windows | Quit |
HOTKEY + left stick or d-pad to the right |
Next CD (games on several CDs), with an arcade stick too |
F12 + D, on a keyboard |
Next CD |
| Mouse, keyboard | Windows' own |
| Player 1's pad: left stick or d-pad | Directions |
Player 1's pad: A, B, X, Y |
Buttons 1 to 4 |
| Player 1's pad: right stick | Mouse pointer |
Player 1's pad: R3 / HOTKEY + R3 |
Left click / right click |
Player 1's pad: HOTKEY + L3 |
Show or hide the on-screen keyboard |
The HOTKEY combinations work whichever button is pressed first.
With no mouse and no keyboard, the gamepad is enough. HOTKEY + L3 shows an on-screen keyboard: pick a key with the d-pad or the left stick, B types it, A hides the keyboard. Shift, Ctrl, Alt and AltGr stay held until the next key. The keyboard hides a text box at the bottom of the screen? Push the d-pad up past its top row: it moves to the top of the screen, and back down past the bottom row. While it shows, the game gets none of the gamepad. Its letters follow Recalbox's language: AZERTY in French, QWERTZ in German, QWERTY otherwise.
Quitting closes the game first, then Windows, as if you had chosen Start > Shut Down: "Closing, please wait…" shows at the bottom left until it is over, usually two to three seconds. That is on purpose: what a game writes as it closes — profiles, options — is kept this way. A game in progress, though, is not saved: save it inside the game before quitting.
The gamepad is Recalbox's player 1, whichever it is, and Windows sees it already configured as a four-button pad. Many games of the day still start on the keyboard: choose the gamepad once in the game's options, and the choice is kept.
recalbox.conf| Key | Values | Effect |
|---|---|---|
win9x.recalboxoverlays |
0 / 1 |
0: no decoration on a wide screen, the bars stay black. Also in the menus: RECALBOX OVERLAYS |
win9x.integerscale |
0 / 1 |
1: picture scaled by a whole number, for Windows 95/98 only. For every system: INTEGER SCALE (PIXEL PERFECT) |
| Path | Contents |
|---|---|
/recalbox/share/bios/win9x/ |
Your Windows, productkey.txt, the 3dfx driver; QuickTime and a SoundFont, optional |
/recalbox/share/saves/win9x/windows98.vhd |
The Windows 98 installed from your CD, shared by every game |
/recalbox/share/saves/win9x/<game>.retail/ |
That game's own Windows, the installed game and its saves |
/recalbox/share/saves/win9x/<game>.exo/ |
The same, for an eXoWin9x game |
Deleting a game: from Recalbox (START on the game > DELETE GAME), with the saves box ticked — its Windows and the installed game go with it, several gigabytes freed. A game deleted straight from the roms folder over the network leaves its folder in saves/win9x: remove that by hand.
DOS and Windows 3.x games keep their own system, DOS, and their own emulator, DOSBox Pure. Nothing changes there.
On a machine without the Windows 95/98 system — a Raspberry Pi 4, for instance — DOSBox Pure can also install a Windows inside a disk image, by hand: see Playing Windows 95 and 98 games with DOSBox Pure.