Taito Type X games are Windows programs. Recalbox runs them with Wine-Proton, the Wine build Valve maintains for Proton.
Wine runs the game, but not the cabinet around it. The controls and the coin mechanism normally go through a JVS I/O board. JVSEmu takes its place here: a loader of the JConfig family, installed once (see BIOS and loaders).
Wine is licensed under LGPL 2.1.
JVSEmu is third-party, closed software. It is not shipped with Recalbox.
Compatibility| RPI3/RPI02W | RPI4/400 | RPI5/500 | OGA/OGS/RG351 | PC | RG353 |
|---|---|---|---|---|---|
| ❌ | ❌ | ❌ | ❌ | ✅ | ❌ |
64-bit PC (x86_64) only, with a Vulkan-capable graphics driver.
Features| Feature | Supported |
|---|---|
| Automatic pad configuration | ✔︎ |
| Cabinet Test menu and Service button | ✔︎ |
| Quit with Hotkey + Start | ✔︎ |
| Pause | ❌ |
| Save states | ❌ |
| Netplay | ❌ |
| RetroAchievements | ❌ |
There is no BIOS. There is, however, the JVSEmu loader, and the CryptServer keys Taito games check at startup.
Recalbox does not provide these files. Use those of the io/1cc loader pack (the JConfig family). TeknoParrot is not supported.
The EmulationStation BIOS manager does not know these files: it will never report them as missing.
Copy them once, like this:
┣ 📁 recalbox
┃ ┣ 📁 share
┃ ┃ ┣ 📁 bios
┃ ┃ ┃ ┣ 📁 arcadeloaders
┃ ┃ ┃ ┃ ┣ 📁 jvsemu
┃ ┃ ┃ ┃ ┃ ┣ 🗒 JVSEmu.dll
┃ ┃ ┃ ┃ ┃ ┣ 🗒 dinput8proxy.dll
┃ ┃ ┃ ┃ ┃ ┣ 🗒 dsoundproxy.dll
┃ ┃ ┃ ┃ ┃ ┣ 🗒 ddrawproxy.dll
┃ ┃ ┃ ┃ ┃ ┣ 🗒 d3d9proxy.dll
┃ ┃ ┃ ┃ ┣ 📁 keys
┃ ┃ ┃ ┃ ┃ ┣ 🗒 *.key
engate reads no configuration at all: the game then starts with no controls.<dll>proxy.dll load JVSEmu into the game. The loader the dumps ship, jvs_loader.exe, crashes under Wine. Recalbox therefore drops next to the game a proxy named after a library the game already imports, taking the first that fits in the order dinput8, dsound, ddraw, d3d9.*.key are the CryptServer ones. Without its key a game stops on XIO ERROR before it ever reads a pad. Recalbox copies every key of the pack into a dump that carries none — both at its root and in TypeXmulti\txac, the two places the games look — and leaves a dump that already has its own key untouched. If the pack has no key for your game, add its .key file to this folder.If the game imports none of the four libraries, Recalbox cannot load JVSEmu into it: the game still starts, but with no controls. The log then carries
no hijackable import for JVS proxy.
If you only play one family of games, only its folder is needed.
RomsA game is a folder: the full dump of the cabinet's disk, renamed with the .wine extension. Change nothing inside the dump: Recalbox completes it at launch.
Place the games like this:
┣ 📁 recalbox
┃ ┣ 📁 share
┃ ┃ ┣ 📁 roms
┃ ┃ ┃ ┣ 📁 taitotypex
┃ ┃ ┃ ┃ ┣ 📁 Battle Fantasia.wine
┃ ┃ ┃ ┃ ┃ ┣ 🗒 game.exe
┃ ┃ ┃ ┃ ┃ ┣ 🗒 ...
At launch, Recalbox:
game.exe in nearly every dump.It records the files it added in .arcade-loaders. When you update the pack in bios/arcadeloaders, those files are replaced on the next launch. A file the dump ships itself is never overwritten.
If the dump has no
game.exe, Recalbox takes the only.exeit finds, or the largest one, leaving out the dump's own utilities (setup,crclist,zipmaker,unins…). A stubborn dump is fixed withexe=in agame.windowsfile.
Recorded in November 2026, on the team's hardware. This list is in no way exhaustive: the other games have not been tried.
| Game | State |
|---|---|
| The King of Fighters XIII | ✅ playable, controls verified |
| BlazBlue | ✅ playable, controls verified |
Advanced emulator configurationPads are configured automatically from EmulationStation: Recalbox writes the files the loader reads, monitor_input.bin and monitor_misc.bin, into the game folder.
| Cabinet | Pad |
|---|---|
| Directions | D-pad and left stick |
| Coin | Select |
| Start | Start |
| Buttons 1, 2, 3 | X, Y, RB |
| Buttons 4, 5, 6 | A, B, LB |
| TEST (operator menu) | Left stick click (L3) |
| SERVICE | Right stick click (R3) |
| Quit the game | Hotkey + Start |
Select only adds a credit, it does not quit the game: the JVSEmu exit is bound to a keyboard key, so that no pad button can reach it.
A game folder you configured by hand, with JConfig, keeps your configuration: Recalbox only rewrites the files it wrote itself. The screen size is written there too, otherwise the games open in a 640 × 480 window in a corner.
A game.windows text file, placed in the game folder, changes the launch of that game alone:
| Key | Role |
|---|---|
exe= |
program to launch |
args= |
program arguments |
dxvk=0 or dxvk=1 |
turns DXVK off or on (dxvk=0 renders through OpenGL, useful when the screen stays black) |
setenv=NAME=VALUE |
environment variable |
prefix= |
Wine prefix to use, instead of the system's own |
runner= |
another Wine install, under /recalbox/windows/runners/ |
In args= and setenv=, %GAMEDIR% is replaced by the game folder as Windows sees it.
The games of one system share a Wine prefix (a bottle), /recalbox/windows/prefixes/taitotypex: it is created on the first launch.
The launch scripts of /recalbox/share/system/configs/wine/hooks.d/ work as they do for NESiCAxLive.
The log is in /recalbox/share/system/logs/wine.log.
[arcade-loaders] loader missing: …: the bios/arcadeloaders/jvsemu folder is missing.[arcade-loaders] missing from loader: JVSEmu.dll: the folder is there, but not the loader.XIO ERROR on screen: the game's CryptServer key is missing.dxvk=0 in a game.windows.JVSEmu.dll is a packed build, or the log reports no hijackable import for JVS proxy.
External links