Sega RingEdge and RingWide games are Windows programs. Recalbox runs them with Wine-Proton, the Wine build Valve maintains for Proton.
The controls go through RConfig: ring_loader.exe starts the game, and Ring_IO.dll replaces the cabinet's I/O board. RConfig is installed once (see BIOS and loaders).
Wine is licensed under LGPL 2.1.
RConfig is third-party, closed software. It is not shipped with Recalbox.
Compatibility| RPI3/RPI02W | RPI4/400 | RPI5/500 | OGA/OGS/RG351 | PC | RG353 |
|---|---|---|---|---|---|
| ❌ | ❌ | ❌ | ❌ | ✅ | ❌ |
64-bit PC (x86_64) only, with a Vulkan-capable graphics driver.
Features| Feature | Supported |
|---|---|
| Automatic pad configuration | ✔︎ |
| Cabinet Test menu and Service button | ✔︎ |
| Quit with Hotkey + Start | ✔︎ |
| Driving controls (wheel, pedals) | ❌ |
| Pause | ❌ |
| Save states | ❌ |
| Netplay | ❌ |
| RetroAchievements | ❌ |
There is no BIOS. There is, however, the RConfig loader.
Recalbox does not provide these files. Use those of the io/1cc loader pack (the RConfig family). TeknoParrot is not supported.
The EmulationStation BIOS manager does not know these files: it will never report them as missing.
Copy them once, like this:
┣ 📁 recalbox
┃ ┣ 📁 share
┃ ┃ ┣ 📁 bios
┃ ┃ ┃ ┣ 📁 arcadeloaders
┃ ┃ ┃ ┃ ┣ 📁 ring
┃ ┃ ┃ ┃ ┃ ┣ 🗒 Ring_IO.dll
┃ ┃ ┃ ┃ ┃ ┣ 🗒 ring_loader.exe
┃ ┃ ┃ ┃ ┃ ┣ 🗒 RConfig.exe
┃ ┃ ┃ ┃ ┃ ┣ 📁 sv
┃ ┃ ┃ ┃ ┃ ┃ ┣ 📁 Game name
All three files are required: if one is missing, the game does not start.
The sv/ folder is optional. It holds one cabinet memory (NVRAM) profile per game. Each subfolder is named after the game folder, without the .wine extension.
RomsA game is a folder: the full dump of the game, renamed with the .wine extension. Change nothing inside the dump: Recalbox completes it at launch.
Place the games like this:
┣ 📁 recalbox
┃ ┣ 📁 share
┃ ┃ ┣ 📁 roms
┃ ┃ ┃ ┣ 📁 segaring
┃ ┃ ┃ ┃ ┣ 📁 Virtua Tennis 4.wine
┃ ┃ ┃ ┃ ┃ ┣ 🗒 ...
At launch, Recalbox:
Ring_IO.dll, ring_loader.exe and RConfig.exe into the game folder;sv/:
E2PROM.bin of 8 KiB and SRAM.bin of 2 MiB), as on a fresh board, because Ring_IO.dll crashes when it is missing;ring_input.bin and ring_config.bin;ring_loader.exe.ring_loader.exe starts the game then exits at once. Recalbox waits for the game itself before handing control back to EmulationStation.
The NVRAM is game data: Recalbox creates it once and never replaces it afterwards. Your cabinet settings and your high scores stay there.
Recorded in November 2026, on the team's hardware. This list is in no way exhaustive: the other games have not been tried.
| Game | State |
|---|---|
| Melty Blood: Actress Again Current Code | ✅ playable, controls and exit verified |
| Virtua Tennis 4 | ⚠️ starts up to the demonstration mode |
| Initial D Arcade Stage 8 Infinity | ❌ not supported yet (display, card reader) |
Advanced emulator configurationPads are configured automatically from EmulationStation. RConfig does not read the same files as the Taito loaders: Recalbox writes its own, ring_input.bin and ring_config.bin, into the game folder.
| Cabinet | Pad |
|---|---|
| Directions | D-pad |
| Coin | Select |
| Start | Start |
| Buttons 1, 2, 3 | A, B, RB |
| Buttons 4, 5, 6 | X, Y, LB |
| TEST (operator menu) | Left stick click (L3) |
| SERVICE | Right stick click (R3) |
| Quit the game | Hotkey + Start |
The driving controls (wheel, pedals, gears) are not configured yet.
A game folder you configured by hand, with RConfig, keeps your configuration: Recalbox only rewrites the files it wrote itself. The screen size is written there too, otherwise the games open in a 640 × 480 window in a corner.
A game.windows text file, placed in the game folder, changes the launch of that game alone:
| Key | Role |
|---|---|
exe= |
program to launch, instead of ring_loader.exe |
dxvk=0 or dxvk=1 |
turns DXVK off or on (dxvk=0 renders through OpenGL, useful when the screen stays black) |
setenv=NAME=VALUE |
environment variable |
prefix= |
Wine prefix to use, instead of the system's own |
runner= |
another Wine install, under /recalbox/windows/runners/ |
ring_loader.exedoes not passargs=arguments on to the game.
The games of one system share a Wine prefix (a bottle), /recalbox/windows/prefixes/segaring: it is created on the first launch.
The launch scripts of /recalbox/share/system/configs/wine/hooks.d/ work as they do for NESiCAxLive.
The log is in /recalbox/share/system/logs/wine.log.
[arcade-loaders] loader missing: …: the bios/arcadeloaders/ring folder is missing.[arcade-loaders] missing from loader: …: one of the three files is missing from bios/arcadeloaders/ring.dxvk=0 in a game.windows.
External links